cecotec FORCECLIMA 7100 SOUNDLESS Manuel D'instructions page 63

Fan speed
Under the cooling mode, press the key to select high or low wind speed operation.
This option is not available under the dehumidification mode.
NOTE:
Under certain conditions (defrost), it may not operate at the selected speed.
Timer
Press this icon to set the timer. When the timer symbol blinks, use the increase and decrease
icons to select the desired operating time.
The timer can be set from 1 to 24 hours, and the digits increase and decrease by 1 hour.
Drainage instructions
When the air conditioner stops operating because the water tank is full, turn it off and unplug
it from the power supply. The full tank indicator (FULL) will start blinking and the appliance will
not operate until the water inside the tank is drained.
Manual drainage. Fig. 10
Place a container below the water outlet behind the body.
Unscrew the drain cap and unplug the water plug. The water will automatically flow into a
container.
NOTE:
- Move the device carefully, so as not to spill the water in the water tank at the bottom of
the body.
- Keep the drain cap and the water plug properly.
- During drainage, the body can be tilted slightly backwards.
- If the water container cannot hold all the water, before the water container is full, stuff the
water outlet with the water plug as soon as possible to prevent water from flowing to the
floor or the carpet.
- When the water is discharged, re-tighten the water plug and tighten the drain cap.
- Restart the appliance after the plug and cap are installed, otherwise condensed water of
the appliance will flow to the floor or the carpet.
Continuous drainage. Fig. 11
Unscrew the drain cap and unplug the water plug.
Set the drainage pipe into the water outlet.
Connect the drainage hose to a bucket or big container.
PROTECTION FEATURES:
FORCECLIMA 7100 SOUNDLESS
ENGLISH
63