Télécharger Imprimer la page

DeWalt DCE6820 Guide D'utilisation page 11

Publicité

Les langues disponibles

Les langues disponibles

2. Pour water through the filter and into the tank. Do not fill
past the top of the measurement line
3. Screw the tank cap back into place.
Use (Fig. A, H)
8
1. Pull the nozzle
straight out of the nozzle holder
and unwrap the hose
18
as described in the To Fill Tank section.
2. Fill the tank
3. Insert battery pack as described in the installing and
Removing the Battery Pack section.
4. Turn the water tank on by pressing the (I) side of the
three‑position switch
5. Turn the water tank off by pressing the three‑position
switch until it sits in the middle position.
6. If using a Wireless Tool Control™ remote, press the top of
the three‑position switch to select the setting.
Adjusting Water Pressure (Fig. I)
To increase water pressure, turn the water pressure
20
adjustment collar
To decrease water pressure, turn the water pressure
adjustment collar counterclockwise as seen from behind.
MAINTENANCE

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can cause injury.
Your D
WALT power tool has been designed to operate
e
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Storing (Fig. J, K)
1. Remove the battery pack
18
2. Empty the tank
and let dry. Do not allow water to freeze
in tank. Store above freezing temperatures.
15
3. Place the filter
in the tank, under the tank cap
4. Screw the tank cap on tightly.
5. Properly attach the hose
a. Wrap the hose around the hose storage hook
water tank cap.
b. Halfway through, snap the hose clip
two locations to hold the hose close to the water tank.
c. Continue wrapping the hose until the nozzle meets
the nozzle holder
d. Line up the nozzle detent
nozzle holder and push straight in until it snaps
into place.
If you suspect water has frozen inside the system, take the
water tank to a warm place and wait until the ice has melted.
Transporting (Fig. L)

WARNING: Always use and store in horizontal position
with battery compartment cover
Assemble the water tank as described in the storing section.
16
.
7
.
19
.
clockwise as seen from behind.
10
.
7
8
and nozzle
:
22
onto the hose in
17
.
23
with the bottom of the
12
facing up.
The water tank may be carried by either the top handle
front handle
Cleaning

WARNING: Never use solvents or other harsh
17
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including
brush inspection and replacement, when applicable)
should be performed by a factory service center or
an authorized service center. Always use identical
replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
• Register online at www.dewalt.com.
Three‑Year Limited Warranty
For warranty terms, go to https://www.dewalt.com/
support/warranty.
14
.
To request a written copy of the warranty terms, contact:
Customer Service at D
Joppa Road, Towson, MD 21286 or call 1‑800‑4‑D
(1‑800‑433‑9258).
21
and
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country‑specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑800‑4‑D
(1‑800‑433‑9258) for a free replacement.
25
, or both.
WALT Industrial Tool Co., 701 East
e
English
24
,
WALT
e
WALT
e
9

Publicité

loading