Télécharger Imprimer la page

Jenn-Air JMW8530DAS Guide De L'utilisateur page 13

Publicité

Les langues disponibles

Les langues disponibles

O
C
VEN
OOKING
Create-A-Space
(select models)
Select wall oven models are
equipped with a convertible
half rack. The left side of
the rack can be removed
to accomodate a large
roaster on the lower
rack. The right side of
the rack is still
available to hold a
casserole dish.
Notes:
• The removable section of the rack can be used as a
cooling rack or trivet. Make sure rack is cool before
removing from the oven.
• Make sure oven is cool before removing or reinstalling
the half rack.
• Do not use cookware that extends beyond edge of rack.
• For best results, allow two inches between the pan
placed on the rack and the oven side wall.
• Use caution when removing items from the half rack to
avoid burns.
• Carefully remove items from the lower rack to avoid
disturbing the half rack.
TM
Half Rack
Oven Light
The oven light automatically comes on whenever the oven
door is opened. When the door is closed, press the Oven Light
pad to turn the oven light on and off. A beep will sound every
time the Oven Light pad is pressed.
Oven Vent
The oven vent is located below the oven door on single wall
ovens, and below the bottom door on double wall ovens.
When the oven is in use, the area near the oven vent may
become hot enough to cause burns. Do not block the vent
opening for best baking results.
Oven Fans
A cooling fan will automatically turn on whenever the oven is
operating. It is used to help keep internal parts on the control
panel cool. The fan may continue to operate after the oven
has been turned off. The fan will automatically turn off when
parts have cooled. This is normal.
A convection fan (select models) is used to circulate hot air
in the oven when the convection feature is selected. It
automatically turns on whenever the Convect pad is pressed
and will turn off when Convect is canceled.
Note: The convection fan will automatically stop whenever
the oven door is opened.
12

Publicité

loading