Balluff BMP 01-ZLZPP1A-00-P-S75 Serie Notice D'utilisation page 39

BMP 01-ZLZPP _ 1A- _ _ _ _ -00 -P _ _ /P _ _ -S4/P _ _ -S75
Magnetic Field Positioning System
1
Notes to the user
1.1 Validity
This guide describes the structure, function and setup
options of the BMP Magnetic Field Positioning System with
IO-Link interface. It applies to models
BMP 01-ZLZPP _ 1A- _ _ _ _ - 00 -P_ _/P _ _ -S4/P _ _ -S75
(see type code on page 31).
This guide is intended for qualified technical personnel.
Read this guide before installing and operating the BMP.
1.2 Symbols and conventions
Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Digits without further identification are decimal numbers
(e.g. 23). Hexadecimal numbers are shown with the prefix
0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
1.3 Scope of delivery
– BMP Magnetic Field Positioning System
– Condensed guide
The target and mounting accessories depend
on the application and are to be ordered
separately.
www.balluff.com
1.4 Approvals and markings
The CE Mark verifies that our products
meet the requirements of the current EU
Directive.
The BMP meets the requirements of the following product
standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Conducted interference induced by
high-frequency fields
EN 61000-4-6
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1.5 Abbreviations
IODD IO device description
PD Process data
MDC Measurement data channel
SSC Switching signal channel
Severity level 2
Severity level 3
Severity level 3
Severity level 3
english 5