Breakaway Floor-Tool; Setting The Cleaning Controls - Nacecare TT 1117/100 Mode D'emploi

Breakaway floor-tool

Note Care must be taken to reduce speed when cornering or when manoeuvring around obstacles.
Fig.18
1
To start: hold down either trigger and press the yellow start button once
The floor-tool design incorporates a breakaway feature.
Allowing it to safely disengage from its mounting should it
become caught on an obstruction, during forward machine
movement.
To re-attach the blade to its holder.
First loosen the retaining knobs on the floor-tool body and slide
onto the holding bracket.
Tighten retaining knobs to finger tight. (See fig.18)

Setting the cleaning controls

Ensure your TT machine has been plugged into a suitable power
supply.
Select the desired function using the ON / OFF switches fitted to the
handle.
11
2
1