Nacecare TT 1117/100 Mode D'emploi page 6

Do not use on surfaces have a gradient exceeding that marked on the machine.
Only use brushes provided with the appliance or those specified in the instruction manual.
The use of other brushes may impair safety.
WARNING
A full range of brushes and accessories are available for this product.
Only use brushes or pads which are suitable for the correct operation of the machine for the specific task being
performed.
It is essential that this equipment is correctly assembled and operated in accordance with current safety regulations.
When using the equipment always ensure that all necessary precautions are taken to guarantee the safety of the
operator and any other persons who may be affected.
Wear non-slip footwear when scrubbing. Use a respiratory mask in dusty environments.
The machine, while charging, must be positioned so that the mains plug is easily accessible.
When cleaning, servicing or maintaining the machine, replacing parts or converting to another function the power
source shall be switched off.
Mains operated machines shall be disconnected by removing the power plug, and battery operated machines shall be
disconnected by switching off the isolating key.
Machines left unattended shall be secured against unintentional movement.
Operators shall be adequately instructed as to the correct use of the machine.
Brush Motor Vac Motor
1500W 1000W
Gross Weight Protection Class
Full
214 lbs Class 1
Brush Motor Vac Motor
1500W 1000W
Gross Weight Protection Class
Full
214 lbs Class 1
Power Sound
Pressure
120v 60Hz 80 dB(A)
Hand Arm
Vibration
1.4 +/- 0.05ms²
Power Sound
Pressure
120v 60Hz 80 dB(A)
Hand Arm
Vibration
1.4 +/- 0.05ms²
Speed
60Hz = 180rpm
Pad Net Weight
17" 125.5 lbs
Speed
60Hz = 180rpm
Pad Net Weight
20" 125.5 lbs
6
Data
TT 1117
Brush Dimensions
17" Width - 18.5"
Length - 44.5"
Height - 46.5"
Cleaning Water Capacity
Range
1653" 10.5 gal
TT 1120
Brush Dimensions
20" Width - 22.5"
Length - 44.5"
Height - 46.5"
Cleaning Water Capacity
Range
1653" 10.5 gal