Publicité
3. MIST
When used as a mist stage, Stage 2 operates according to the mist timer.
MIST UNITS ON
MIST UNITS OFF
Time on [in seconds] - The portion of the mist cycle during which the mist
units are on.
Time off [in seconds] - The portion of the mist cycle during which the mist
units are turned off.
The differential is the temperature interval which determines when the mist
units turn on and off. The offset is the number of degrees above the set
point at which the mist units turn off. Mist units operate only according to
the timer settings. In the example below, the set point is 75
o
4
F and the differential is 2
cording to the mist timer settings. If the temperature falls to 79
units stop operating.
MIST SETTINGS
Adjusting the Mist Offset
The mist offset ranges from 0 to 20.0
Turn the selection knob to OFFSET — STAGE 2. The current offset
value flashes on the display.
Use the adjustment knob to set the offset to the desired value.
ON
1
2
3
TIME ON
o
o
F. At 81
F, the mist units start operating ac-
o
F (0 to 11.1
TC4-NVS/P
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
4
5
6
TIME OFF
o
C).
TC4-NVS/P.rev.05
7
o
F, the offset is
o
F, the mist
31
Publicité
