Publicité
When the six points of the temperature curve have been specified, the tem-
perature curve must be activated for the controller to begin to automatically
adjust the target room temperature.
Activating the temperature curve:
Press the push-button once again.The word OFF appears
flashing on the display.
Turn the adjustment knob clockwise by one notch and leave it in
this position. The word ON appears flashing on the display and
after 10 seconds, the temperature curve pilot light turns on
indicating that the temperature curve is now activated.
Viewing Current Set Point / Adjusting Current Day Number
When the temperature curve is activated, the current temperature set
point and day number can be viewed at any time. The current day
number can also be adjusted in order to move forward or backward on
the temperature curve.
Set the selection knob to SET POINT / T
temperature set point is displayed.
Press the push-button. The current day number is dis-
played.
Use the adjustment knob to set the day number to the de-
sired value.
TC4-NVS/P
o
CURVE. The current
TC4-NVS/P.rev.05
21
Publicité
