Publicité
Les langues disponibles
Les langues disponibles
3. TECHNICAL DATA
Below is an example of the nameplate:
The nameplate attached to the inside or rear of the appliance (depending on the model) includes the entire
information specific to your appliance.
We recommend that you make a note of its serial number in this booklet prior to installation, so that you
can refer to it later (technical work, request for assistance, etc.).
CAUTION: no assistance can be provided without this information.
4. OPERATING INSTRUCTIONS
Assembling the appliance
Assemble castors: put the appliance on a flat surface, take out the wrench from foam box, then assemble
the castors.
Attention: the back castor is with brake, but the front one is not.
Water tank
unlock the water tank at the bottom of back side , draw the water tank, then add water into it, then push the
water tank into the unit, and lock the water tank . (picture 1)
Attention: Pay attention to the level of water tank when add water. The water level indicator is on
the front side. (picture 2)
The level of water tank should not over "MAX" scale at any time, when humidifying, the total level
of water tank should not below "MIN" scale.
Put ice or ice-crystal box into the water tank if you want to strengthen the efficiency of cooling. But
the total level of water tank should not over "MAX" scale.
24
Publicité
