Publicité
Les langues disponibles
Les langues disponibles
Air Conditioner Features (continued)
Fan Mode
Rotate the knob to the left to select your choice of fan speeds for air circulation.
NOTE: When selecting a fan speed, the compressor will not run.
On models with a vent control, this mode can be used to remove
stale air from the room, or to draw fresh air into the room. Check
the section Fresh Air Vent Control.
Thermostat
The thermostat is used to set the desired room temperature when the unit is being operated in the COOL MODE. To set the desired room
temperature, rotate the thermostat switch to the desired setting. After the set temperature is achieved the thermostat will automatically
start and stop the compressor in order to maintain the desired set temperature.
Rotate the thermostat selector clockwise for higher cool settings. Higher cool settings will provide lower room temperature. Rotate the
thermostat selector counterclockwise for lower cool settings. Lower cool settings will provide higher room temperature.
Normal Sounds
Sound of Rushing
Air At the front of the unit, you may
hear the sound of rushing air
being moved by the fan.
Gurgle/Hiss
Gurgling or hissing noise may be heard
due to refrigerant passing through the
evaporator during normal operations.
High Pitched Chatter
High ef ciency compressors
may have a high pitched chatter
during the cooling cycle.
17
Vibration
The unit may vibrate and make noise
because of poor wall or window
construction , or incorrect installation.
Pinging or Switching
Droplets of water hitting
during normal operation may cause
pinging or switching sounds.
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM
Publicité
