Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
7
Installing the Weather Stripping
(applicable only to Energy Star
models )
□ In order to minimize air leaks between the room air
conditioner and the window opening, trim the weather
stripping (EE) to a proper length, peel off the protective
backing and plug any gaps if needed.
8
If AC is Blocked by Storm Window
□ Add wood as shown, or remove storm window before
air conditioner is installed. If storm window frame must
remain, be sure the drain holes or slots are not caulked
or painted shut. Accumulated rain water or condensation
must be allowed to drain out.
Removing AC From Window
□ Turn AC off, and disconnect power cord.
□ Remove sash seal from between windows, and unscrew
safety sash lock.
□ Remove screws installed through frame and framelock.
□ Remove the R1 Panel and close (slide) side panels into
frame.
□ Keeping a rm grip on air conditioner, raise sash and
carefully remove.
□ Be careful not to spill any remaining water while lifting unit
from window. Store parts WITH air conditioner.
EE
Storm window
frame or other
obstruction.
15
Please contact 1-877-527-0313 for further assistance.
SASH
1-1/2 in. min.
(38 mm)
Board thickness
as required, for
proper pitch to
rear, along entire
sill. Fasten with
nails or screws.
HOMEDEPOT.COM
Publicité
