Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
3
Installing the Accordion Panels
NOTE: Top rail (1) and sliding panels (2) at each side are
offset to provide the proper pitch to the rear of 5/16 in. This
is necessary for proper condensed water utilization and
drainage. If you are not using the side panels for any reason,
this pitch to the rear must be maintained.
□ Place unit on oor, a bench or a table. Hold the accordion
panel in one hand and gently pull back the center to free
the open end.
□ Slide the free end "I" section of the panel directly into the
cabinet. Slide the panel down. Be sure to leave enough
space to slip the top and bottom of the frame into the rails
on the cabinet.
□ Once the panel has been installed on the side of the
cabinet, make sure it sits securely inside the frame channel
by making slight adjustments. Slide the top and bottom
ends of the frame into the top and bottom rails of the
cabinet.
□ Slide the panel all the way in and repeat on the other side.
Top left
Bottom Rail
NOTE: If storm window blocks AC, see Step 9.
13
Please contact 1-877-527-0313 for further assistance.
1
2
Top Rail
Top right
HOMEDEPOT.COM
Publicité
