KNF Yamato RE212-G Manuel D'instructions page 125

12. BC102-G Instruction manual
Installation Procedure
① Place this unit on the right side of the
RE212-G and place the BM312-G (BO312-
G) so that it fits inside the positioning
bumper on the base.
② Connect L-terminal of the connection cable
to the Mini DIN connector (4pin) of RE212-
G.
③ Slide the rear cover over the post along its
groove. Draw connection cable through the
U-notch in the bottom of the rear cover.
※Exercise caution not to pinch connection
cable and power cable in the rear cover
when attaching it.
Positioning bumper (4 places)
Connection cable
(L-terminal)
U-shaped
groove
Connection cable
39
RE212-G
BC102-G
BM312-G
BO312-G