Publicité
Les langues disponibles
Les langues disponibles
3. PRE-OPERATION PROCEDURES
Installation Procedure
11. Connecting AC adapter/power cable
(1) Hold AC adapter with the inlet facing the
bottom left viewed from the back and insert it
into the AC adapter holder at an angle.
(2) Connect the plug from AC adapter to the DC
jack Use included tape fastener to bind
excess cable to keep it in the holder.
(3) Insert power cable into the inlet of AC
adapter.
(4) Slide supplied rear cover over the post along
its groove. Draw power cable through the U-
shaped opening in the bottom of rear cover.
Exercise caution not to pinch AC adapter cable
and power cable in rear cover when attaching
it.
DC jack
AC adapter holder
U-notch
20
AC adapter
Inlet
Tape fastener
Power cable
Rear cover
Post
DE
EN
FR
ES
IT
Publicité
