Publicité
Les langues disponibles
Les langues disponibles
Product Maintenance
1. Cleaning Side Brushes
Clean the side brush when it gets dirty and replace it if it's damaged. Max life span for side
brush is 12 months.
Note: Before replacing side brushes, check and make sure the 'L' / 'R' mark on side brush
match with the 'L' / 'R' mark on the bottom base of the robot.
2. Cleaning Dust Bin and Filters
Empty and clean dust bin after each use following the steps as shown in the figures below:
Press
A．Press PUSH to open the cover
C. Take out HEPA.
Wash dust bin and primary
F.
filter under tap water.
Note:
a. Wash HEPA filter after 15~30 days of use. Max life span for HEPA and filter is 24 months.
b. Re-install the HEPA and primary filter after they are fully dry.
c. HEPA and primary filter could be replaced if needed.
d. Do not dry the filters under direct sunlight.
D. Open dust bin cover,
take out primary filter.
Clean HEAP
G.
with brush, avoid
wash it under water
B. Take out dust bin
E. Empty dust bin.
H. Install primary filter and HEPA back
into the dust bin.
11
Publicité
