Fagor FG736 Manuel D'instructions page 27

Product Components
Display Panel
A. Turn on the power switch at the bottom side of the robot, robot will beep twice and be in standby status,
LED indicator will be in gradual blue.
B. Press CLEAN button, robot will beep three times and the indicator will flash in blue, then it will start
cleaning. And the indicator will keep in blue during cleaning.
C. If the robot is malfunctioned, its indicator will be in different status (details please take reference in
troubleshooting).
D. The indicator will flash in red when the robot has low power.
E. During charging (robot on charging home base or connected by charging adapter), CLEAN button indicator
will get red gradually. After fully charged, the robot will have 5 beeps and CLEAN button indicator will turn
blue.
F. When the robot is successfully scheduled, the indicator will be pink for two seconds. (Press PLAN button to
check whether robot has already scheduled. If yes, the indicator will be pink for two seconds. If not, the
indicator will have no change and robot beeps once. )
7