Publicité
Les langues disponibles
Les langues disponibles
Product Operation
Starting Up/ Pause/ Sleep mode/Power off
1. Starting up
A.
Switch on the robot, robot will have 2 beeps and in standby status, LED indicator will be in gradual
blue.
B.
Press CLEAN button on main body or ON/OFF on remote controller to start cleaning. The robot will
have 3 beeps, and the CLEAN indicator will keep blue during cleaning.
Note: a. if robot is in sleep mode, press CLEAN button to wake the robot up from sleep mod. Then press
CLEAN for a second time, the robot starts cleaning automatically.
b. If robot in standby for more than 15 minutes, it can only be wake up by CLEAN button on robot.
2. Pause
To stop the robot temporarily from cleaning:
A. Press CLEAN button on main body;
B. Or press ON/OFF button on remote controller.
Note: when robot is paused, user can perform new operation.
3. Sleep mode
Turn robot into sleep mode, and its display indicator will be in dark (robot in standby, not powered off);
A. The robot will automatically turn to sleep mode if no command received in 30-60 seconds.
B. Press CLEAN button on the main body for one second, robot will turn on sleep mode.
Note: if the robot is not in use for a long time, please turn the power switch off.
4. Power off
To switch off the robot.
Scheduling
You can schedule the robot by remote control to make it start cleaning at a certain time
1.
To schedule the robot when it is standby or charging on the docking station. (Press CLEAN to wake
up the robot, or press ON/OFF to wake it up. If the robot is in cleaning mode, stop it before scheduling. )
2.
Point the remote control to the robot signal receiver, press PLAN button until the LED indicator in pink
color and robot is successfully scheduled.
3.
User can press PLAN button to check whether robot has already scheduled. If yes, the indicator will
be pink for two seconds. If not, the indicator will have no change and robot beeps once.
4.
To cancel the scheduling, point the remote control to the robot signal receiver, press PLAN button until
robot LED indicator flash in pink and robot scheduling is canceled.
Note:
A. The robot will always work at the scheduled time after scheduling confirmed.
B. All scheduling will be canceled if the robot is turned off. If no operation on robot for 1 minute, it will turn
to sleep mode.
C. During charging by adapter directly connect to the robot (charging without docking), robot will not accept
scheduling set up.
9
Publicité
