SANNOVER ANITA 10 KW Manuel Utilisateur page 49

EN
Cleaning the base of the crucible holder
Each time you clean the crucible, check that the base underneath does not contain too much ash. If the
amount of ash is too large, the amount of oxygen in the chamber will decrease, which will lead to poor
combustion. Clean the base using a metal-tank vacuum cleaner.
Example of a dirty base Example of a clean base
Warning! A vacuum cleaner can only be used to clean the ash when it has cooled to room temperature and
there are no more flying embers.
Cleaning the ashtray
Every 2 or 3 days, check the ash in the ash box and remove it.
A vacuum cleaner can only be used to clean the ash when it has cooled to room temperature and there
are no more flying embers.
Example of a dirty ash pan Example of a clean ash pan
Cleaning of heat exchanger pipes
Each time you turn on the stove, push and pull the ash cleaning rod several times, this will help to
improve the efficiency of the heat exchange.