SANNOVER ANITA 10 KW Manuel Utilisateur page 43

Setting the speed of the ventilation motor
Press to enter the speed setting mode of the ventilation motor, 5 speed levels, ranging from 1 to 5,
the 1st level being the weakest and the 5th level the strongest. Display 1 on the screen corresponds to the
1st level, display 2 on the screen corresponds to the 2nd level, etc. Press
press to confirm and exit.
3.5 Stove settings
ITEMS Power level 1
Worm screw OFF：4.5 S
motor ON：1.5 S
Exhaust fan 43
Worm screw motor:
The minimum scale is 0.1 s and the stop/start setting range is 0 to 9.9 s. For example,
stop the first speed: 5.5 s, start the first speed: 1.5 s, which means stop 5.5, start 1.5 s and
cycle.
Exhaust fan:
The regulation range is between 32% and 100% (72v-230v). The larger the value, the
greater the ventilation speed will be. For example, the maximum speed is 100, the
minimum is 32.
Note: This setting is only given as an indication, because the settings must be modified according to
the calorific value of the pellets!
3.6 Fuse
The power socket at the back of the stove is equipped with a fuse to prevent over voltages and over currents.
When the fuse is blown, please replace it with an identical fuse.
Note: a spare fuse is located within the three-in-one switch.
(Example Anita 10) GENERAL SETTINGS
Power level 2 Power level 3
OFF：5.0 S OFF：4.5S
ON：2.0 S ON：2.5 S
44 45
or
Power level 4 Power level 5
OFF：4.0 S OFF：3.5 S
ON：2.5 S ON：2.5 S
46 48
EN
to set, then