Publicité
Les langues disponibles
Les langues disponibles
18 INSTALLATION
8
l
Reverse the
upper hinge assembly and
hinge filler.
l
• Carefully lift
inner top lock rod (on the left) out of the
outer door frame. Rotate the
assembly - inner top lock rod 180 degrees
and install it on the upper right side of the
outer door. You will need to press firmly to
install the hinge assembly.
• Now rotate the
and install it on the upper left side of the
door.
9
g
Reinstall the
top lock rod holder using 2
screws removed in step 6.
10
i
Reverse the
lower hinge bracket and
hinge assembly.
1) Remove the screw from the
hinge bracket (on the right) and lift the
the upper hinge assembly-
l
upper hinge
n
hinge filler 180 degrees
i
lower
hinge bracket out. Set it aside. Remove
the two screws from the
assembly on the bottom left and lift the
hinge assembly out.
n
2) Rotate the
degrees and install it on the right side
using the two screws removed in a
previous step.
3) Flip over the
release the tabs on the back locking the
e
4) Rotate the hinge filler 180 degrees and
snap it back onto the front of the hinge
bracket facing in the opposite direction.
k
k
lower hinge assembly 180
i
lower hinge bracket and
hinge filler to the hinge bracket.
k
lower hinge
Publicité
