Segway Navimow i Serie Manuel D'utilisation page 28

1
Make sure the mower is powered on. With Bluetooth connection,
your phone will connect to the mower automatically.
Note: If the mower is in lock status, you must enter the PIN
code before operating the mower. The default code is 0000 and
can be reset via the Navimow app.
O N
3
Calibrate the mower to ensure accurate positioning.
5
Walk along the edge.
Calibrate
2
Tap 'Create a map' to start mapping.
x x x x
+ +
Create a map
4 Find a proper starting point along the edge of your lawn. Keep
within 6 m (19.7 ft) from the mower during the mapping process.
≤
6m
Angle: Make sure to follow a straight line with a smooth turning
angle of no smaller than 90°.