1
Fix the GNSS antenna on the tube.
3
Rotate the other extension tube onto the base fork.
5
Connect the GNSS antenna to the charging station.
If the cable isn't long enough, you can buy extra
antenna extension cables and use 3 cables at most
to extend the total length up to 30 m (98.4 ft).
A
B
Secure the nuts tightly to prevent water from
entering them.
2
Unfold the base fork and insert it into the ground.
4
Slide in the tube with the antenna.
6
Secure the antenna cable on the pole with the
supplied hook and loop tape.
To ensure satellite signal, DO NOT put
anything on the antenna.
6
4
5
2
To make sure that the antenna
can be stably connected to the
charging station once the
installation is completed, please
fully insert the base fork into the
ground.