S&P EMIDUAL-500P Manuel D'installation & D'utilisation page 11

ENGLISH
OPERATING INSTRUCTIONS
Before operating the heater, please read these instructions thoroughly to avoid
damage and hazardous situations. Any use of this heater other than that stipu-
lated in this instruction manual may cause fire, electric shock or injury, and
voids all warranties.
Warranty does not apply to any defect, deterioration, loss, injury or damage cau-
sed by, or as a result of, the misuse or abuse of this heater. The rights dictated by
State law are not prejudiced. None of the terms of this warranty are to be taken
as excluding any conditions or warranties implied by State law, which cannot be
excluded or modified.
Before any operation remove the packaging and check product integrity. In case
of defects or damages do not try to repair it yourself but contact your dealer.
Do not let children play with the packaging and protect the environment by dis-
posing of the packaging in accordance with the national regulations for waste pro-
cessing.
1. Your product
Other than the heater you have chosen the package includes (picture 1):
- N° 2 metal brackets for wall mounting;
- N° 1 plastic brackets for wall mounting;
- N° 3 nylon plug expansion 8x50mm;
- N° 3 5x60mm cross head screws to fix wall brackets;
q Refer to your dealer is something is broken or missing.
2. For your safety
Make sure that the mains power supply matches the rated input: 230V AC, 50Hz.
Never allow animals or children to play with or touch the product. Attention! The
panel may become very hot while it is working (approximately 80°C = 176°F);
WARNING: In order to avoid overheating, do not cover the heater. Do not hang
anything on the heater and do not cover it while it's working. This is clearly writ-
ten on the cover of the product or shown by the symbol
11