Qlima FC 260 Manuel D'utilisation page 53

Make sure all wires are tucked in the canopy. Connect the AC input to the house
electricity.
WARNING: Put AC adapter into the flat side of bracket and push it through to
the other side which the ceiling fan hangs from. Please see the Arrow direction
showed in Fig 19, otherwise the wires are too short to be connected.
Note: The Green/Yellow wire from bracket connects with the ground wire from
supply power, using the wiring cap to tuck the wires together and then hide
inside the ceiling.
The White wire from AC Adapter connects with the Neutral wire from supply
power, the Black wire from AC Adapter connects with the Live wire from supply
power, using the wiring cap to tuck the wires together. (Make sure all the wires
connect with the correct colors as shown below Fig 19)
(Fig. 19)
RAISE CANOPY
For the ceiling fan with black color , canopy installation as below:
Make sure all wires are tucked in the canopy. Raise the canopy to the mounting
bracket, aligning the two screws on the canopy with the holes on the bracket,
Secure the canopy to the mounting bracket with the screws, see Fig 20.
For the ceiling fan with other colors, canopy installation as below:
Make sure all wires are tucked in the canopy. Raise the canopy to the mounting
bracket, align the two screws into the slot inside the canopy, rotate and twist the
canopy to lock into place. See Fig 21.
Installation is now complete. Turn on the power switch as Fig 22. Then the fan
lights are on. Test and pair your fan immediately using the remote control.
Only for
black color
(Fig. 20)
For the
other colors
(Fig. 21)
4
53