Qlima FC 260 Manuel D'utilisation page 49

BEFORE YOU START
Contact a licensed electrician if you are uncomfortable performing electrical
work. A licensed electrician must install the fan if required by local code.
Do not use the fan with a dimmer switch. Turn off power at breaker.
TOOLS AND MATERIALS REQUIRED
External
hexagonal wrench
(Fig. 3)
INSTALLATION:
INSTALL AIRFOILS
1.1 Put out the motor hub from the package box and place it upside down on
the motor paper holder. Make sure each airfoil matches the corresponding
place with the tri-color label on the hub and tighten the screws. (See Fig 4)
1.2 Three airfoils installed. (See Fig 5)
(Fig.4)
INSTALL LAMPSHADE
2.1 Place lampshade onto the motor hub.
Join the slot of lampshade and slot of motor shaft by tightening the screw that
provided in screw bag. (See Fig 6)
Wire Phillips
stripper screwdriver
(Fig.5)
Step ladder
4
49