DeWalt DWD014 Traduction De La Notice D'instructions Originale page 19

VARIABLE SPEED REVERSIBLE DRILL
DWD014, DWD014S, DWD014S-XE
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D
e
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Power output
No load speed
Maximum drilling range: steel/wood
Torque
Chuck spindle thread size
Maximum chuck capacity
Weight
Noise values and/or vibration values (triax vector sum) according to EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
DWD014
V 230
AC
1
W 550
/min 0–2800
mm 10/25
Nm 7.9
UNF 1/2" x 20
mm 10
kg 1.3
dB(A) 85
dB(A) 93
dB(A) 5
m/s 6.7
2
m/s 2 1.5
EC‑Declaration of Conformity
Machinery Directive
Variable Speed Reversible Drill
DWD014, DWD014S
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN 62841-1:2015+A11:2022 and EN
62841-2-1:2018+A11:2019+A1:2022+A12:2022.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering- PTE Europe
D WALT, Richard-Klinger-Straße 11,
e
EnGLIsH
WALT one of the
e
DWD014S DWD014S-XE
230 230
1 1
550 550
0–2800 0–2800
10/25 10/25
7.9 7.9
1/2" x 20 1/2" x 20
10 10
1.3 1.3
85 85
93 93
5 5
6.7 6.7
1.5 1.5
WALT at
e
WALT.
e
17