Publicité
Les langues disponibles
Les langues disponibles
Mounting the grass catcher
1. Lift the collision guard (5).
2. Remove the mulching kit (
used (see "Insert/remove mulching
kit").
3. Place the grass catcher (7) on the
mounting bracket (22) provided at the
back of the lawn mower.
4. Lower the collision guard (5) onto the
grass catcher (7) - it will keep it in
place.
Removing the grass catcher
5. Lift the collision guard (5).
6. Unhook the grass catcher from the
mounting bracket. Flap down the colli-
sion guard to the housing.
On emptying the grass catcher
also refer to section "Disposal/en-
vironment".
Insert/Remove mulching
kit
Insert mulching kit:
1. Lift the collision guard (5).
2. Remove the grass catch (
(see "Mount/remove grass catcher").
3. Insert the red locking button (21)
downwards and insert the mulching kit
(20). The red locking button clicks into
place.
Remove mulching kit:
4. Lift the collision guard (5).
5. Insert the red locking button (21)
downwards and remove the mulching
kit (20).
Adjusting the Cut Height
Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
Hold the cutting height adjuster (11) and
move it to the correct cutting height, as
20) if
appropriate.
The equipment has 7 positions for
adjusting the cut height: 30 - 75 mm
The correct height is around 30 – 45 mm
for a decorative lawn and around
30 –65 mm for a used lawn.
1. Connect the mains cable (16) with the
extension cable.
2. Turn the end of the extension cable
into a loop and hook it into the cable
strain relief (19).
3. Connect the equipment to the power
supply.
4. Before switching on, ensure that the
equipment is not in contact with any
7) if used
objects.
5. To switch on, press the
release button (18) on the
handle at the same time
as pressing the start lever
(2). Release the release button (18).
6. To switch off, release the
start lever (2).
A higher cut height should be
selected for the first cut of the sea-
son.
Switching On and Off
STOP
3
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do not
touch the moving blade. There
is a risk of injury.
GB
START
1
I
2
STOP
START
I
3
2
71
Publicité
