GB
Sensor keys
The buttons on the control panel are sensor keys, which already respond when lightly
touched with the finger.
Switch on /off the appliance
The appliance is in operation as soon as it is connected to the power supply.
When the appliance is powered on for the first time, the actual refrigerator and freezer
temperatures are displayed. The display will flash. If the doors are closed it will switch off
after 30 seconds.
Maybe the panel lock is active.
Notice
▶ The appliance is preset to the recommended temperature of 5°C (refrigerator) and
- 18°C (freezer). Under normal ambient condition you need not to set a temperature.
▶ The presetting mode for the My Zone compartment is "Fruit & Vegetables".
▶ When the appliance is switched on after disconnection from the main power supply, it
may take up to 12 hours for the correct temperatures to be reached.
Empty the appliance before switching off. To switch off the appliance, pull the power cord
out of the power socket.
Lock/unlock panel
Notice
The control panel is automatically blocked against
activation if the doors are closed and 30 seconds no
button is pressed. For any settings the control panel
must be unlocked.
▶ Touch button "G" for 3 seconds to block all panel
elements against activation. The buzzer alarms
and the related indicator "g" is now displayed.
▶ For unlocking press again the button.
Standby-mode
The display screen turns off automatically 30 seconds after pressing a key. The display will
be automatically locked. It lights up automatically when pressing any key or opening any
door (Alarm does not light up the display screen).
Select the working mode
You may need to select one of the following two ways to set the appliance:
1) Smart mode
Under smart mode, the appliance can automatically adjust the temperature setting ac-
cording to the ambient temperature and temperature change in the appliance. If you do
not have any special requirements, we recommend that you use smart mode (refer to
SMART MODE).
Use
Lock
Hold 3 Sec.
9