Resus Risycor CX Manuel page 37

■ 9 OPERATION / USE
9.1 PRODUCT
The logger has two 'USB-C CONNECTORS':
• One to connect the logger to the mains by means of the supplied
USB-C mains adaptor;
• One to download the measurement data via a separate USB cable
(also available on the normal market).
• It is also possible to disconnect the USB cable on the side of the
mains adaptor and use it to download the measurement data
• Both connectors are compatible with all the functions.
9.2 LED STATUSES (SEE ALSO INSTRUCTIONS FOR USE IN DEVICE)
PROBLEM
Everything ok
Corrosion rate too high
Problem with Risycor
Probe not connected or
defect
Risycor not
connected or defect
HEARTBEAT
INDICATOR /
ACTION
[GREEN] [GREEN]
Slow
[RED] [GREEN]
SOS > Fast
ALARM IGNORE
= 3 days no
[GREEN] [RED]
alarm
[OFF] [RED]
[OFF] [OFF]
Check power
supply
MONITOR LED
HEARTBEAT INDICATOR / ALARM IGNORE
INSTRUCTIONS FOR USE
VOLT-FREE CONTACT
USB-C CONNECTOR (2X)
CORROSION LED
RJ45 ETHERNET CONNECTOR (CXI)
PROBE TIP
SOLUTION
Read out Risycor +
Identi fy cause and
solve
Read out Risycor and
check error code
Replace probe,
possibly with Retractor
Replace logger
EN
VOLT�FREE
CONTACT
Closed
Open
Open
Open
Open
37