Health O Meter Professional 2210KL-AM Mode D'emploi page 12

OPERATING INSTRUCTIONS
Function
HOLD/RLS/
RECALL
UNIT
▲
ZERO/TARE
CLEAR/
REWEIGH
ENTER/
SELECT
▼
BEFORE FEED
AFTER FEED
AMOUNT FED
P/N 82-00013 2210KL-AM 2210KL4-AM 2210KG-AM 2210KG4-AM web
Turns scale on and off. Also used when entering Calibration or
Options mode.
Holds the displayed weight until the button is pressed again to
release the value. Will recall the previously locked weight if pressed
when nothing is on the scale.
2210KL-AM/2210KL4-AM Only: Toggles between pounds (LB),
kilograms (KG) and grams (GM). If Unit Display setting is enabled,
press and hold UNIT button to briefly display the alternate weight
measuring unit. Note: The Unit button is disabled on KG only
models or on KL models with Everlock
is also disabled if the "Unit Display" setting is disabled.
Used to navigate through Options mode or to set pre-tare value.
Zeroes out or tares the scale prior to a weighing.
Exits out of a mode or process. Also allows for repeated weighing
of the patient without removing the patient from the scale.
Selects an option or value.
Used to navigate through Options mode or to set pre-tare value.
Used in store the patient's weight before being fed as part of the
process to measure breast milk intake.
Used in store the patient's weight after being fed as part of the
process to measure breast milk intake.
When pressed, displays the amount fed measurement as part of
the process to calculate breast milk intake.
Keypad
Description
®
engaged. The UNIT button
12