Becker CentronicPLUS SWC548 PLUS Notice De Montage Et D'utilisation page 29

Setting the thresholds
Setting the thresholds
3s
Bring the transmitter as close as possible to the
required receiver.
Press the programming button for 3 seconds. The
transmitter performs a search and the LED ring
continuously changes colour. The transmitter then
switches to receiver selection and selects the re-
ceiver with the best connection quality.
▻ The receiver confirms.
If you do not receive confirmation from the re-
quired receiver, you can press the
toggle between the available receivers until the re-
quired receiver confirms.
▻ The transmitter displays the current as-
signment status of the receiver via the
LED ring.
Assignment status
Lights up yel-
low:
Lights up
blue:
Lights up
green:
The receiver is not yet part of the
installation or is in the as-de-
livered condition.
The receiver is not assigned to
the selected channel.
The receiver is assigned to the
selected channel.
/ button to
29 - en