Beurer MP 62 Mode D'emploi page 25

3. INCLUDED IN DELIVERY
Check that the device packaging has not been tampered with and make
sure that all contents are present. Before use, ensure that there is no vis-
ible damage to the device or accessories and that all packaging material
has been removed. If you have any doubts, do not use the device and
contact your retailer or the specified Customer Services address.
1 x Manicure and pedicure device
10 x High-quality attachments made from sapphire and felt
10 x Single-use attachments made of sandpaper
1 x Adapter
1 x Storage pouch
1 x These instructions for use
4. DEVICE DESCRIPTION
The corresponding drawings are shown on page 3.
Manicure/pedicure device
1
+/- speed regulation
2
Battery level indicator
3
On/o switch
4
After use, before cleaning and changing any accessory parts,
the power unit should always be disconnected.
Ensure that the sliding switch on the device is in the centre po-
sition (= o ) before you connect the device to a power supply.
5. APPLICATION
- Make sure that the device is switched o beforehand.
- Select an attachment and push it onto the instrument spindle using
a slight pressure. The attachments can be heard to engage. To re-
move: pull the attachment and instrument apart in the axial direction
(straight).
Clockwise/anti-clockwise rotation
5
LED light
6
Storage bag
7
25