Ego Power+ CS1800 Guide D'utilisation page 9

POWER TOOL USE AND CARE
◾
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate for
which it was designed.
◾
Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must be
repaired.
◾
Remove the battery pack, if detachable, from the power tool and/or
activate any battery disabling device before clearing jammed material,
making any adjustments, changing accessories, cleaning, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
◾
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
◾ Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition that
may affect the power tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power
tools and accessories.
◾
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
◾
Use the power tool, accessories, tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
◾
Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces may lead to unsafe handling
and/or loss of control of the tool.
BATTERY TOOL USE AND CARE
◾
Recharge only with the charger specied by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of re when used
with another battery pack.
8
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC