Ego Power+ CS1800 Guide D'utilisation page 24

OPERATION
WARNING:
Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufcient to inict serious injury.
WARNING:
Always wear eye protection that is marked to comply with ANSI
Z87.1. Failure to do so could result in objects being thrown into your eyes and other
possible serious injuries.
WARNING:
Do not use any attachments or accessories not recommended by the
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
Before each use, inspect the entire product for damaged, missing, or loose parts such
as screws, nuts, bolts, etc. Securely tighten all fasteners and caps and do not operate
this product until all missing or damaged parts are replaced.
APPLICATIONS
You may use this product for basic felling, limbing, pruning, and woodcutting of lumber
and trees.
FILLING OILTANK WITH BAR AND CHAIN LUBRICANT
WARNING:
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool before lling the tank with oil.
WARNING:
Do not smoke or bring any re or ame near the oil or the chain saw.
Oil may spill and cause a re.
NOTICE:
The chain saw is not lled
with oil at the time of purchase. It is
essential to ll the tank with oil before
use. Operating the chain saw without
chain oil or when the oil level is below
the minimum mark (Fig. 9) will result in
damage to the chain saw. Chain life and
cutting capacity depend on optimum
lubrication. The chain is automatically
lubricated with chain oil during operation.
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1800/CS1800-FC
9
Oil Tank Cap
Minimum Oil Mark
23