Polaris 2878214 Instructions D'installation page 9

TIP OUT WINDSHIELD KIT
KIT PN 2878214
3. If a Cab Roof Kit (No. 2878215) is mounted on your
vehicle, apply the self-adhesive sealing foam (#2) on
top of the windshield's frame (#1) as illustrated. If
not, keep it for future installation.
4. Install the lower edge trims (#26) onto the bottom
(2)
of the windshield's frame (#1) as illustrated.
5. Position and fasten the lower left part of the
windshield assembly (#1) onto the vertical front tube
of the cab frame using the left lower bracket (#8),
the Torx socket machine screws
(2) M6-1.0 X 16mm
(#9), the bonded seal washer (#13), and
M6 X 20mm
the bonded seal washer (#14) (finger
M6 X 38.1mm
tighten at this time). Repeat for the opposite side.
LEFT FRONT VIEW
NOTE: If you plan to install the door
kit at this time, assemble the striker
bolt included in the door kit onto the
lower support as illustrated.
7515134-521E
A-7515134 Rév. D
- 3 -
Imprimé en Chine / Printed in China