Polaris 2878214 Instructions D'installation page 10

TIP OUT WINDSHIELD KIT
KIT PN 2878214
2010 RANGER MODELS:
6. Remove the left machine screw retaining the two sections of the cab frame. Position and fasten the left upper
bracket (#4) onto the cab frame using the originalmachine screw (finger tighten at this time).
7. Fasten the upper part of the windshield assembly (#1) onto the left upper bracket (#4) using
Torx socket machine screws (#10) and
8. Repeat steps 6 and 7 for the opposite side. Tighten all machine screws.
9. Reinstall the front part of the Cab Roof Kit (#A) to the windshield's frame (#1) using the original hardware.
Secure all hardware retaining the rear part of the cab roof (#A) to cab frame.
2010 MODELS
LEFT SIDE VIEW
2010 RANGER MODELS:
6. Fasten the upper part of the windshield assembly (#1) onto the tube of the cab frame using the left upper support
(#6),
(3) M8-1.25 X 20mm
time).
7. Repeat step 6 for the opposite side. Tighten all machine screws.
8. Reinstall the front part of the Cab Roof Kit (#A) to the windshield's frame (#1) using the original hardware.
Secure all hardware retaining the rear part of the cab roof (#A) to cab frame.
2009 MODELS
LEFT SIDE VIEW
7515134-521E
A-7515134 Rév. D
Fender washers (#11) (finger tighten at this time).
(2) M8
Torx socket machine screws (#10), and flat washers (#12) (finger tighten at this
(3) M8
- 4 -
(2) M8-1.25 X 20mm
Imprimé en Chine / Printed in China