IKEA FRYSA Consignes De Sécurité page 10

ENGLISH
• Fast Freezing function
• Drinks Chill function
• Child Lock function
• no symbol: normal operation
You can turn on any function at
any time and turn the function off
by pressing Function several
times until no icon appears.
Fast Freezing Function
To freeze fresh foods, you will need to
activate the Fast Freezing function.
Press Function (several times if necessary)
until the corresponding icon appears.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing Function (refer to
"Functions Menu").
Drinks Chill function
The Drinks Chill mode is to be used to set an
acoustic alarm at the preferred time, useful
for example when a recipe requires to cool
down a mixture for a certain period of time.
1. To switch on the function press Function
until the corresponding icon appears.
The Drinks Chill indicator flashes. The timer
shows set value (30 minutes) for a few
seconds.
2. Press the Timer regulator button to
change the Timer set value from 1 to 90
minutes.
3. Press OK to confirm.
The Drinks Chill indicator is shown. Timer
starts to flash (min). At the end of the
countdown the Drinks Chill indicator flashes
and an audible alarm sounds.
4. Press OK to switch off the sound and
terminate the function.
It is possible to deactivate the
function at any time during
the countdown by pressing
Drinks Chill. The Drinks Chill
indicator goes off
It is possible to change the
time during the countdown
and at the end by pressing
the temperature colder
button and the temperature
warmer button.
Child Lock function
To lock any possible operation through the
buttons select the Child Lock function.
1. Press Function until the corresponding
icon appears.
The Child Lock indicator flashes.
2. Press OK to confirm.
The Child Lock indicator is shown.
To switch off the function repeat the
procedure until the Child Lock function
indicator goes off.
High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to a
power failure) is indicated by:
• flashing temperature
• red illumination of display
• sounding of buzzer
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
• the display illumination remains red.
When you press Function to deactivate the
alarm, the highest temperature reached in
the compartment appears on indicator
for some seconds.
At this point the flashing stops and the
display illumination changes over from red
to white.
10