Publicité
Les langues disponibles
Les langues disponibles
•
Switch on the bandsaw as described in
section 6.3.
•
Move the bandsaw with its blade (13) in front
of the workpiece.
•
First place the workpiece stop (11) against
the workpiece and align the blade with the
cutting plane.
•
Now guide the bandsaw with a firm grip to the
workpiece and cut into it carefully.
•
Important! Do not exert excessive pressure
on the blade! This way you will obtain the
straightest possible cut while also prolonging
the life of the blade.
•
Do not cut any cross-sections larger than
those described in section 4. Technical data.
•
Warning! If you are unable to cut through the
workpiece in a single pass, there will be a
greater risk of the blade getting jammed and
causing kickback!
6.5 Transport
Transport the machine by lifting it only by the
handle (1) or only by the adjustable handle (8).
Never use the guards for handling or transporting
purposes.
7. Cleaning and maintenance
HAZARD!
Always take the battery out of the equipment
before starting any cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it down with compressed air at
low pressure.
•
We recommend cleaning the equipment
immediately each time after use.
•
Clean the equipment regularly with a damp
cloth and some soft soap. Do not use
cleaning agents or solvents; these may
be aggressive to the plastic parts in the
equipment. Ensure that no water can get into
the interior of the equipment. The ingress of
water into an electric power tool increases the
risk of an electric shock.
7.2 Maintenance
There are no other parts inside the equipment
which require maintenance.
Anl_TE_MB_18_127_Li_SPK7_NA.indb 17
Anl_TE_MB_18_127_Li_SPK7_NA.indb 17
EN
8. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
Important! We recommend you to slacken the
blade (see 5.5) if you are not going to use the
machine for a long time. We also recommend you
to protect the guide rollers (18) with mineral oil
during long periods of storage.
The reprinting or reproduction by any other
means, in whole or in part, of documentation
and papers accompanying the products is
strictly subject to the express consent of Einhell
Germany AG.
Subject to technical changes.
- 17 -
28.02.2024 10:43:52
28.02.2024 10:43:52
Publicité
