Télécharger Imprimer la page

Moulinex Easy Soup LM841B10 Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
(fig 12) and finish by cleaning the inside of the jug and the motor unit with a
damp sponge.
• If there are still stains on the inside of the jug, leave it to soak for a few hours
in hot soapy water, then remove the residue with a plastic scourer.
EN
• Rinse the bowl.
• Be careful when you remove the motor unit (B) and when cleaning the blade,
which is extremely sharp.
• To clean the outside of the motor unit (B) and the walls of the jug (I), use a
damp cloth. Dry carefully.
• Do not put washing-up liquid in the jug while the easy-cleaning programme is
running (risk of overflowing during the cleaning cycle).
• The appliance is not designed to be cleaned in a dishwasher.
• TIP: Some foods may stain the bowl of your appliance. This poses no risk
whatsoever to your appliance or to your health. To remove stains, add some
water mixed with a small amount of cleaning product intended for use in your
dishwasher (e.g. a tablet, liquid, powder) to the bowl of your appliance. Leave
overnight to soak. Then, gently scrub with a sponge and the stains will disappear.
WHAT TO DO IF YOUR APPLIANCE DOESN'T WORK
PROBLEMS
The appliance does
not work.
Excessive vibrations
Leak at the top of
the jug.
CAUSES
The plug is not
connected or switched
on at the mains power
socket.
The motor unit (B) is
not correctly positioned
or locked in.
The appliance has not
been placed on a flat
surface; the appliance is
not stable.
Volume of ingredients is
too high.
Overflow sensor (C) is
clogged up.
Volume of ingredients is
too high.
14
SOLUTIONS
Plug your appliance into a
power socket. Ensure that the
power cord is correctly inserted
into the socket on the side
handle and mains socket.
Remove
some
ingredients.
Check that the contents to not
exceed the MAX level and ensure
that the ingredients are spread
evenly over the base of the jug.
Place your appliance on a
stable,flat
heat-resistant,
clean, and dry surface.
Reduce the quantity of
ingredients processed.
Clean sensor (C).
Reduce the quantity of
ingredients processed.
of
the

Publicité

loading