Makita 9924DB Manuel D'instructions page 4

FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
• Switch can be locked in "ON" position for ease
of operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
► 1. Lock button 2. Switch trigger
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
► 1. Lever
Pull the lever all the way out and install the belt over the
rollers, and then return the lever to the original position.
1
2
► 1. Adjusting knob
While the belt is running, use the adjusting knob to cen-
ter the belt tracking. Failure to do so can result in frayed
belt edges and wear on the sander frame.
4 ENGLISH
Installing or removing abrasive belt
1
CAUTION:
• When installing the belt, make sure that the
direction of the arrow on the back of the belt
corresponds to the one on the tool itself.
Adjusting belt tracking
1