Abus IPCB64620 Manuel Utilisateur page 101

7.10.2 Cover detection
Enable cover detection:
Preview:
Drawing:
Delete:
Sensitivity:
7.10.3 Alarm input
Alarm Input No.:
Alarm name:
Alarm type:
Enable alarm input processing:
This function monitors the covering of an area in the video image.
Preview and configuration area.
This allows you to draw the area which should be monitored by
cover detection. Operation: Press button -> draw rectangle in the
preview using left mouse button -> press button again to finish
drawing.
Deletes the area.
Change the sensitivity of the detection here (3 levels).
Select the alarm input to be configured here (number depends on
camera model).
enter the name here.
the alarm type determines the idle and triggered statuses.
NO: normally open (normal status open)
NC: normally closed (normal status closed)
The alarm input can only be used when the checkbox
is ticked.
101