Publicité
To wall mount:
CARE AND MAINTENANCE:
•
Extreme temperatures, vibration and shock should be avoided as these may cause
damage to the unit and give inaccurate forecasts and readings.
•
When cleaning the display and casings, use a soft damp cloth only. Do not use
solvents or scouring agents as they may mark the LCD and casings.
•
Do not submerge the unit in water.
1. Secure the bracket onto a desired wall using the screws and
plastic anchors.
2. Clip the sensor onto the bracket.
Note:
Before permanently fixing the sensor wall base, place all units in the
desired locations to check that the outdoor temperature reading is
receivable. In event that the signal is not received, relocate the
sensors or move them slightly as this may help the signal reception.
34
Publicité
