Publicité
Confirm with the SET key and enter the Air pressure unit setting.
2.
hPa / inHg PRESSURE UNIT SETTING:
The pressure display can be selected to show relative air pressure in hPa
or inHg (default is "inHg").
1.
Use the OUT/+ key to toggle between "hPa" or "inHg" unit.
2.
Confirm with the SET key and enter the Relative air pressure value
setting.
Note: Units of weather icon sensitivity and air pressure history are not
affected. They are always expressed in hPa.
RELATIVE AIR PRESSURE VALUE SETTING
The default relative pressure value is 29.92 inHg (1013 hPa). This can be
manually set to another value within the range of 28.35 – 30.72 inHg (960 –
1040 hPa) for a better reference.
1.
The current relative pressure value will start flashing
2.
Use the OUT/+ key to increment and IN key to decrement the value.
3.
Keep holding the key allows the value to advance faster.
4.
Confirm with the SET key and enter the Weather forecast icon
sensitivity setting.
WEATHER FORECASTING ICON SENSITIVITY SETTING:
For locations with rapid changes of weather conditions, the weather icons
sensitivity can be set to a different level for faster display of weather
conditions.
Flashing
Flashing
Flashing
33
Publicité
