Publicité
TIME RECEPTION ON/OFF SETTING:
In area where reception of the WWVB time is not possible, the WWVB time
reception function can be turn OFF. The clock will then work as a normal
Quartz clock. (Default setting is ON).
4.
The digit "ON" will start flashing on the LCD.
5.
Use the OUT/+ key to turn OFF the time reception function.
6.
Confirm with the SET key and enter the 12/24-hour format setting.
Note:
If the Time Reception function is turn OFF manually, the clock will not
attempt any reception of the WWVB time as long as the Time
Reception OFF function is activated.
The time reception icon and the "WWVB" icon will not be displayed
on the LCD.
12/24-HOUR FORMAT SETTING:
The hour display can be selected to show hours in 12-hour or 24-hour
settings. (Default 12-Hour)
1.
Use the OUT/+ key to toggle between "12H" or "24H".
2.
Confirm with the SET key and enter the Manual time setting.
MANUAL TIME SETTING:
In case the Weather Station cannot detect the WWVB-signal (for example
due to disturbances, transmitting distance, etc.), the time can be manually
set. The clock will then work as a normal Quartz clock.
Hour flashing
1.
The hour digit will start flashing.
2.
Use the OUT/+ key to set the hour.
Flashing
Flashing
Minutes flashing
31
Publicité
