Publicité
POSITIONING THE WEATHER STATION:
The weather station has been designed to be hang on a wall or free
standing.
For free standing:
Simply attached the stand to the bottom of the unit and
place onto a flat surface.
POSITIONING THE THERMO-HYGRO TRANSMITTER
To wall mount:
1. Secure the bracket onto a desired wall using the
2. Clip the sensor onto the bracket.
Note:
Before permanently fixing the sensor wall base, place all
units in the desired locations to check that the outdoor
To wall mount
Choose a sheltered place. Avoid direct rain and
sunshine.
Before wall mounting, please check that the outdoor
temperature and humidity values can be received from
the desired locations. To wall mount:
1.
Fix a screw (not supplied) into the desired wall,
leaving the head extended out the by about 0.2"
(5mm).
2.
Hang it onto the screw. Remember to ensure that
it locks into place before releasing.
The thermo-hygro transmitter is supplied with a
holder that may be attached to a wall with the
two screws supplied. The sensor can also be
position on a flat surface by securing the stand
to the bottom to the sensor.
screws and plastic anchors.
40
Publicité
