Beninca CP.MBE24 Mode D'emploi page 17

Let us suppose it is necessary to:
- set an automatic closing time (TCA) of 100s
- activate pre-blinking
Perform the operations described below step by step:
Step Press Display
1
PAR
2
TCA
3
040
4
100
5
PRG
TCA
6
PAR
7
Log
8
TCA
9
Pre
10
OFF
11
12
PRG
Pre
13
PAR
EXAMPLE OF PROGRAMMING
First menu
First function of the first menu
Value currently set for the function selected
Set the desired value with the <+> and <-> keys
The value is programmed
When programming has been made, the display goes to the function just set
Press <+> and <-> simultaneously to go to the higher menu
Second menu
First function of the second menu
Press <-> several times to select PRE logic
Value currently set for the function selected
Set the desired value with the <+> and <-> keys
ON
The value is programmed
When programming has been made, the display goes to the function just set
Press <+> and <-> simultaneously to go to the higher menu and quit programming or wait
30s.
Notes
17