Publicité
Hose
Tuyau
Manguera
Tabs
Languettes
Lengüetas
+
Removing Clogs
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢ ➢ Unplug vacuum.
➢ ➢ Press two tabs and pull open suction
Suction
Inlet
➢ ➢ Disconnect hose from short hose and
Couvercle
(entrée
d'aspiration)
Abertura de
➢ ➢ Plug in vacuum cleaner and turn on.
aspiración
Motor
Protector
➢ ➢ Stretch hose in and out to remove
Protecteur
du moteur
Protector
de motor
➢ ➢ If clog still exists, turn vacuum
Short Hose
Tuyau court
Manguera
corta
➢ ➢ Remove lower plate.
➢ ➢ Remove short hose from nozzle by
➢ ➢ Inspect hose end and clear any
Short Hose
Tuyau court
➢ ➢ Reinstall short hose.
Manguera
corta
➢ ➢ Reinstall lower plate.
- 34 -
inlet and check for clogging.
check the hose for clogging.
clog.
cleaner OFF and UNPLUG POWER
CORD.
lifting straight up.
obstructions.
Publicité
