Publicité
Les langues disponibles
Les langues disponibles
Appendix
–continued
Tag7
Sharpness
Expansion Mode
Video Detect
DVI Selection
Off Timer
Language
OSM Position
OSM Turn off
Press "+" or "-" to adjust. This is a digital capability for keeping a crisp
image at all signal timings. It continuously adjusts to maintain a distinct or soft
image as preferred, and is set independently according to different timings.
Sets the zoom method.
FULL: The image is expanded to 1280 x 1024, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM1: Zoom with center fixed. The image is expanded from the rate of
1.0 to 3.0 times individually for horizontal (H.EXPANSION) and vertical
(V.EXPANSION) direction by 0.1 step.
CUSTOM2: Zoom with top left corner fixed. The image is expanded from the
rate of 1.0 to 3.0 times individually for horizontal (H.EXPANSION) and
vertical (V.EXPANSION) direction by 0.1 step.
Selects the method of video detection when more than one computer is
connected. Press "+" or "-" to select.
FIRST DETECT: The video input has to be switched to "FIRST DETECT" mode.
When current video input signal is not present, then the monitor searches for
a video signal from the other video input port. If the video signal is present in
the other port, then the monitor switches the video source input port to the
new found video source automatically. The monitor will not look for other
video signals while the current video source is present.
LAST DETECT: The video input has to be switched to the "LAST DETECT"
mode. When the monitor is displaying a signal from the current source and a
new secondary source is supplied to the monitor, then the monitor will
automatically switch to the new video source. When current video input signal
is not present, then the monitor searches for a video signal from the other
video input port. If the video signal is present in the other port, then the
monitor switches the video source input port to the new found video source
automatically.
NONE: The Monitor will not search the other video input port unless the
monitor is turned on.
This function selects the DVI input mode (Input 1). When the DVI selection has
been changed, you must restart your computer. Press "+" or "-" to select.
AUTO: By using the DVI-D to DVI-D cable, the DVI SELECTION is DIGITAL.
By using the D-SUB to DVI-A cable, the DVI SELECTION is ANALOG.
DIGITAL: DVI digital input is available.
ANALOG: DVI analog input is available.
Monitor will automatically turn off after the preset time period from power on
with the ON/OFF function. When you select "ON," press "SELECT" and "+"
or "-" to adjust.
OSM control menus are available in seven languages. Press "+" or "-" to
select.
You can choose where you would like the OSM control image to appear on
your screen. Selecting OSM Location allows you to manually adjust the
position of the OSM control menu left, right, down or up. Press "SELECT" to
move the adjustment menu, and press "+" or "-" to adjust.
The OSM control menu will stay on as long as it is in use. In the OSM Turn
Off submenu, you can select how long the monitor waits after the last touch of
a button to close the OSM control menu. The preset choices are 10, 20, 30,
45, 60 and 120 seconds. Press "+" or "-" to select.
51
Publicité
