Thermo Scientific ES Serie Mode D'emploi page 8

(the set point is the point at which the refrigerator normally holds the temperature at; in rare
circumstances such as high/low room temperatures it may be necessary to adjust this slightly.
Function
To change the set point
Note: set point can be increased or decreased in +/‐ 0.1° increments by a MAXIMUM of 1°C
Changing the temperature scale between Celsius (°C) and Fahrenheit (°F)
Function
To change temperature scale
Changing the factory set point
Changing the factory setting is not recommended.)
followed by
followed by
followed by
(Increase / Decrease)
followed by
followed by
followed by
followed by
followed by
Hold button(s)
Press
down for
3 seconds
1 second
/
up to 10 times
1 second
Hold button(s)
Press
down for
3 seconds
Two times
1 second
/ Once
1 second
Example screen
Once
(current set point)
Example screen
(current scale)
8