PROBLEM
The equipment does
not work
The compressor hardly
ever activates
The door doesn't shut tight
or is opened too often
The ambient temperature
is above that which has
The temperature
been outlined in the
inside the equipment
product specification
is not low enough
Air circulation at the back
(the compressor
of the equipment is
operates
hampered
continuously)
The equipment is placed
such that it is subject to
constant sunlight, or
another heat source e.g.
Radiator
The contents touch the
Water collects at the
back wall of the cabinet
bottom part of the
The drain opening is
refrigerator
clogged
The equipment
The equipment is not level
makes too much
The equipment is touching
noise
another object
Troubleshooting
REASON
A gap in the electric
system circuit
SOLUTION
1. Make sure the plug is properly
inserted into the socket
2. Make sure the socket is not faulty
3. Make sure the power supply cord is
not damaged
1. Check to see if the ambient
temperature is below +10C
1. Rearrange the products so they don't
hamper the door
2. Shorten the time the door is open for
1. Check that the equipment is
operating at an ambient temperature
that meets the product specification
1. Move equipment further away from
the wall
1. Move the equipment to a different
place away from heat sources or
direct sunlight
1. Move the products so they aren't in
contact with the back wall
1. Take the cleaning plug and unclog
the condensate opening
1. Place the equipment on an even
surface or use adjustable feet
1. Reposition the equipment so it is
detached from any other objects
17